After inputting the correct password, click <Login>, the browser will display the 8808F web
management page as seen in the screenshot below:
3.3.2 Change Language
As shown below, in the upper right corner of the web page, click on the drop-down menu bar,
select [English] to complete the web language switching.
3.3.3 Common Buttons Introduction
All Rights Reserved © 1997 - 2017 Enable-IT
™
, Inc. Page
!
of
!
16
49
Please follow the steps to check if the 8808F switch is installed correctly:
1) Check whether the physical connection of the equipment is correct.
- Use the network cable to connect the product’s Ethernet port (except console port)
with the managed computer network card and ensure the link LED of the 8808F port
is on.
2) Check whether the computer TCP/IP agreement setting is correct.
- Your computer’s IP address must be 192.168.1.x (x range is 1 ~ 254, excluding 200,
otherwise it will conflict with the 8808F product’s IP address (192.168.1.200, subnet
mask: 255.255.255.0).
3) Check whether the computer’s port VLAN ID is 1?
- By default, the management VLAN is VLAN 1, same as each port of the 8808F
switch.
Caution
BUTTON
FUNCTION
HELP
Open the online help page on the Settings page to display the help information for
the current page.
CONFIRM
Submit the input information and confirm that information in the current system
provided.
CANCEL
Cancel the current configuration input
RETURN
Return to the previous page
NEW PAGE
Create a new project from the current page
SELECT ALL
Select all the ports from the current page
REFRESH
Refresh the current configuration page
DELETE ALL
Delete all the configuration item from the selected section
