4.3 VLAN Settings
The 8808F Switch supports 2 VLAN modes:
1)
Port-based VLAN Mode:
Defines VLAN members according to the devices ports. After
you specify the port or ports to a VLAN, the specified VLAN Packets can be forwarded
by the port.
2)
802.1Q VLAN Mode:
Defined by IEEE 802.1Q protocol. Processes the packets by
defining the packets tags.
4.3.1 VLAN Configuration
On the [VLAN / Port VLAN] page, you can observe the VLAN settings of all the current ports on
the 8808F switch and can set several functions such as [Port Range], [Link Type], [VLAN
Forwarding List], [VLAN-untagged Mark List] as shown in the figure below:
The meaning of the parameters on the VLAN settings are shown in the chart below:
All Rights Reserved © 1997 - 2017 Enable-IT
™
, Inc. Page
!
of
!
22
49
PARAMETER
DESCRIPTION
LINK TYPE
Access: The port which is normally used for connecting devices, only belongs to 1
VLAN.
Default: All ports are Access Ports
DEFAULT VLAN ID
Enter the ID # which is needed to be divided (generally 1 - 4044)
VLAN FORWARDING
LIST
VLAN packets can be transferred, others will be discarded.
VLAN UNTAGGED
MARK LIST
Port forwarded packets can be set in VLAN. Untagged without a tag but others can
not.
