En-Vision America ScripTalk 220-SN, Руководство пользователя

Страница: 19 / 29

- 13 -
3 – NETWORK CONFIGURATION
Your 220-SN comes preconfigured with the following LAN settings:

IP Address Setting: Manual

Local IP Address: 192.168.254.254

Subnet Mask: 255.255.255.0

Gateway Address: 192.168.254.1
IMPORTANT: Once you’ve completed the steps below, you will need to
perform the
Reset and Reinitialize routine found in Section 4.4 .
To change these settings:
1. Configure a PC’s network adapter for the following:
a. IP address: 192.168.254.*
i. * is any number from 1-253
b. Subnet mask: 255.255.255.0
c. Default gateway: (none needed)
2. Connect the power supply to the 220-SN printer (see Section
2.4.1).
3. Connect an Ethernet cable between the PC and the 220-SN (see
Section 2.4.2).
4. In a browser, go to http://192.168.254.254
5. Go to the Network Configuration page.
6. Enter the network settings for the printer as determined by
your IT Administrator.
7. Click [Set].
8. Power OFF the printer.
9. Connect the printer via Ethernet cable to the host network.
10. Power ON the printer to complete saving the settings.
11. Now perform the Reset and Reinitialize routine found in Section
4.4 , then you should be ready to print.