En-Vision America ScripTalk 220-SN, Руководство пользователя

Страница: 15 / 29

- 9 -
2.3 – LOADING LABELS
1. With the power supply off,
pull the cover open/close
latches (1) on both sides of
the printer toward you to
unlock the top cover, and
then open the top cover (2).
Make sure the cover rests
firmly in the upright position
so that it will not fall forward
and injure you.
2. Optional Step: The width of
the media holder should
already be set when you
receive the 220-SN. If the
width seems off:
a. While holding the
media guide slide
lever (1), adjust the
width of the media
holder (2) to match
the media size. Finding the right width may be easier by
moving the media holder to its widest width, placing a
roll of ScripTalk Labels between, then adjusting the
width to the proper setting.