7
i.d. mate SUMMIT
inside the carrying case
Getting Started
We’ll first take a look at the vinyl carrying case with the i.d. mate SUMMIT
®
hand held
bar code scanner inside.
Place the carrying case horizontally on the table in front of you with the En-Vision
America embroidery facing you. On each end of the vinyl case, you will find rings that
attach the shoulder strap to the case. There is a belt sleeve on the back of the case
for wearing the unit around your waist using a personal belt. You will need to
experiment with both the shoulder strap and belt sleeve and use the one that is most
comfortable for you.
Now, let’s open the Velcro top flap of the carrying case. Feel all the way to the right
and then to the left. This will give you a good reference as to the proper position of
your i.d. mate SUMMIT
®
while in the case. Gently lift your i.d. mate SUMMIT
®
up and
out of the case, making note of how the padded neck strap is neatly tucked
underneath your unit.
Let’s first explore the carrying case. On the inside bottom of the case there is small
compartment with a Velcro top flap. This compartment is used to store your AC/DC
power adapter. On the top of this compartment lid, you
may notice a small elastic strap. This strap is designed
to store any additional SD memory cards you may have
purchased.
Also, on the inside of the case, there are two additional
pockets used to store your pre-printed bar code labels
and other items.
Let’s move on and explore your new i.d. mate SUMMIT
®
.
