13
beep. Remember, you will need to systematically scan the card until you get a read.
You may have to turn the card over to scan the other side.
You should have just heard a short text message about your Warranty Card. Using
your i.d. mate SUMMIT
®
does take a little practice, but once you get the hang of it, you
will have no problem. We recommend that you touch the product to the scanner
window, and then pull straight back. You can then sweep the scanner up and down,
while slowly rotating the product. Remember, the further away the scanner window is
from the product, the larger the area you are covering with your scan pattern.
Remember, the further away the scanner window is from the product, the larger the
area you are covering with your scan pattern.
Here’s a tip -
In general, you’ll find that bar code labels are typically on the lower half
of products and are often near a label seam. With boxes, labels are typically on the
bottom. Remember, the reason a bar code label has been placed on a product is that
retail stores use them for customer check out. Therefore, the manufacturer has
printed bar code labels in the most effective locations.
Now let’s try scanning the battery compartment lid serial label. Remove the rubber
enclosure and the battery compartment lid. Use care when opening the battery
compartment lid so that the battery does not fall out. Hold the lid in front of the
scanner window. Again, if your scanner has gone to sleep, you will have to press the
mode button to wake the unit up to ensure you are in i.d. Mode.
Once the scanner beeps, you will hear your specific device serial number. You may
need to scan this bar code when contacting us for technical support.
