Lan Manager 7-3
Before Installation
We recommend writing down the following parameters from the Setup
Section in Chapter 2. Refer to them during the installation procedure.
Default Server Name: ____ ____ ____ ____ ____ ____ ____ ____ ____
Default Printer Name: ___ ___ ___ ___ ___ ___ ___ ___ ___ _ ___
IP Address: ___ ___ ___-___ ___ ___ -___ ___ ___-___ ___ ___
TCP port _______ (parallel port)
TCP port _______ (parallel port)
TCP port _______ (serial port)
TCP port _______ (serial port)
Telnet port number _______
RCF port number _______
Have the TES & LAN Manager diskette or the CD-ROM ready for
installation.
Verify Configuration
Check the system configuration before installing Print Manager for TCP/IP
printing.
TCP/IP Stack
Every server and client must have the TCP/IP stack loaded before the server
or client can send a print job to the printer server.
1)
Login to the LAN Manager server as admin.
2)
Go to the LANMAN directory.
3)
Run S
ETUP
.
4)
Pull down the C
ONFIGURATION
menu.
5)
Select N
ETWORK
D
RIVERS
.
A
TCP/IP entry should be listed. If this entry is not present, refer to
LAN Manager documentation for information on installing and enabling
the TCP/IP protocol stack. When finished, exit
SETUP
.
Содержание NJ01B-NT+
Страница 1: ...User Guide for Emulex Printer Servers Version 5 0 ER2054618 00A...
Страница 20: ......
