Emulex LP1005DC-CM2, Руководство по установке

Страница: 5 / 13

LP1005DC-CM2 Hardware Installation Manual Page 2
• Link management and recovery handled by firmware.
• On-board diagnostic trace capability accessible via optional connection.
Compatibility
Prerequisites
• PCI/PCI-X 32- and 64-bit data and addressing
• PCI bus computer with a clock rate up to 66 MHz
• PCI-X bus computer with a clock rate up to 133 MHz
Table 1. Software and Hardware Environments
Software Environments (HS20 and HS40
systems)
• Windows SCSI FCP Miniport Driver for x86 host machines.
This version also supports Windows Server 2003 32-bit.
• Windows 2000 Port Driver (SCSI Port & TCP/IP) for x86
host machines. This version also supports Windows Server
2003 32-bit.
• Windows STORPort Miniport Driver for x86 host machines.
• SUSE Linux 8.0 and Red Hat 3.0 Open Source Driver for
x86 host machines.
Software Environments (JS20 systems) •SUSE Linux 8.0 and Red Hat 3.0 Open Source Driver on
Power PC host machines.
Hardware Environments IBM BladeCenter HS20/HS40 (Intel Xeon platforms) and
JS20 (PowerPC platforms). A fibre channel I/O module (fibre
channel switch or optical pass-thru module (OPM)) must be
installed in bays 3 and/or 4 of the BladeCenter chassis.