Emulex LP1005DC-CM2, Руководство по установке

Страница: 7 / 13

LP1005DC-CM2 Hardware Installation Manual Page 4
4. Locate the area in which the HBA will be installed.
Figure 2: Locate the area in which the HBA will be installed. (HS20 or similar server type depicted.)
5. If there is an I/O expansion card tray in that area (see the following illustration), go to step 7. Otherwise, you
must install the tray; continue with step 6.
Note: Remove any existing screws that will prevent the mounting bracket from flushly
mounting on the Blade Server.