Emulex DCP_link, Руководство по настройке

Страница: 109 / 136

7-16 Chapter 7
Inbound Authentication - Toggle between Enabled or Disabled.
Restricts incoming calls to authentication. The originator (server ID and
address) of each call coming in on the X.25 link is first checked against
the Authentication Database before it is given access to the server. Only
those calls in the table are accepted. All other calls are rejected.
Note: When Inbound Authentication is Disabled, the X.25
link will accept all inbound calls regardless of
originating ID or address.
Authentication Database Name - Allows for separate tables of
individual remote originating ID’s and addresses for inbound X.25 calls.
New tables can be constructed through this field.
Authentication Database - Permits the addition and modification of
individual table entries for the specific Authentication Database Name
chosen. The table entry consists of a remote system ID and DTE address
pair.
Press <Esc> and save changes to accept the remaining default values and
return to the Network Interfaces menu.
Press <Esc> again to return to the Internetworking Configuration menu and
continue with Configuring WAN Call Destinations, below.