Emtec Intuix C230, Руководство пользователя

Страница: 19 / 29

Bit Rate :
Frequency :
Frame rate :
Resolution :
.
2. Select your target location for the output file(s) by clicking the “...” (e.g. “C:\ temp”).
18
Configuration of the application
1. Select the conversion parameters
Way to convert a video clip
1. Launch the application.
2. Make sure the parameters is configurated according to [Configuration of the application] section.
128Kbps
44100 HZ
30 fps
220 : 176
.
3. Click “Add” to add the source file(s).
4. Click the small square (with the "..." marking) to the right side of the "target Location"
panel to choose the destination folder for the converted file.
5. Click “Encode Now!” to start the encoding.
6. After the encoding, you may find the converted file(s) in the target location.
7. Copy/Sync the converted file(s) into the device.
( Please refer to the section of “General and DRM File Transfer” )
Note :
Actual Interface of the software will subject to the changes on software version.
Please refer to the latest instructions on http://www.pdconverter.org