background image

26284-3-0813

Page 3

Installer: Please leave these instructions with the owner for future 

reference.

This unit complies with ANSI Z21.60and CGA 2.26 Decorative Gas 

Appliances For Installation In Solid Fuel Burning Fireplaces. Do not 

burn wood or solid fuels in a fireplace where a decorative gas log 

set is installed. This appliance is for installation only in a solid fuel 

burning fireplace, masonry fireplace or manufactured fireplace.

WARNING: 

Any modification to this gas log set or to controls 

can be dangerous. Improper installation or use of the gas log set 

can cause serious injury or death from fire, burns, explosion or 

carbon monoxide poisoning.

1.  Please follow all local codes regarding installation, combus-

tion and ventilation air or in the absence of local codes follow 

the National Fuel Gas Code ANSI Z223.1(U.S. installation), 

or CAN/CGA-B149, Installation Code (Canada installation).

2.  Proper installation, burner pan location and log placement is 

important to achieve optimum look and performance of your 

gas log set. The logs have been designed for easy location 

and placement on the grate and must be followed for proper 

operation.

3.  Do not operate this log set with glass doors in the closed 

position. A fireplace screen must be in place when the log 

set is burning. Adequate combustion air must be provided for 

proper venting. All flames should go up and out the top of the 

firebox into the flue vent. If any flames float or curl forward into 

the room 

do not operate appliance. 

Check for an open flue 

and adequate combustion air into the room. A damper clamp 

must be installed on the firebox damper to maintain an open 

flue vent condition.

4.  Young children must be carefully supervised when they are 

in the same room as the gas log while in operation. Do not 

place stockings, clothing or any flammable material above or 

near the fireplace.

5.  Do not substitute or use materials other than those supplied 

for use with the log set.

dO NOT OPeRATe THIs GAs lOG seT WITH GlAss dOORs ClOsed.

dANGER

: Indicates a hazardous situation which, if not 

avoided, will result in death or serious injury. 

WARNING

: Indicates a hazardous situation which, if 

not avoided, could result in death or serious injury.

cAuTIoN

: Indicates a hazardous situation which, if not 

avoided, could result in minor or moderate injury.

NOTICE

: Addresses practices not related to personal in-

jury.

  due to high temperatures the appliance should be located 

out of traffic and away from furniture and draperies.

•  Children and adults should be alerted to the hazards of 

high surface temperatures and should stay away to avoid 

burns or clothing ignition.

•  Young children should be carefully supervised when they 

are in the same room as the appliance.

•  Clothing or other flammable material should not be placed 

on or near the appliance.

• 

do not place trash or other articles on the log set during 

operation.

•  during manufacturing, fabricating and shipping, various 

components of this appliance are treated with certain oils, 

films or bonding agents. These bonding agents are not 

harmful but may produce annoying smoke and smells as 

they are burned off during initial operation of the appliance. 

This is a normal temporary occurrence. A window should 

be opened during the initial bake out period. 

•  Keep burner and control compartment clean. 
• 

WARNING: Before installing in a solid fuel burning 

fireplace, the chimney flue and firebox must be cleaned 

of soot, creosote, ashes and loose paint by a qualified 

chimney cleaner.

• 

WARNING: do not allow fans to blow directly into the 

fireplace.  Avoid  any  drafts  that  alter  burner  flame 

patterns.

• 

WARNING: do not use a blower insert, heat exchanger 

insert or other accessory not approved for use with this 

appliance.

•  Installation and repair should be done by a QuAlIFIEd 

seRVICe PeRsON. The appliance should be inspected 

before use and at least annually by a qualified service 

person. More frequent cleaning may be required due to 

excessive lint from carpeting, bedding materials, etc. It 

is  imperative  that  control  compartments,  burners  and 

circulating  air  passageways  of  the  appliance  be  kept 

clean.

•  dO NOT put anything around the fireplace that will obstruct 

the flow of ventilation air.

•  dO keep the appliance area clear and free from combustible 

material,  gasoline  and  other  flammable  vapors  and 

liquids.

•  A yearly examination and cleaning of the venting system 

of the solid-fuel burning fireplace must be performed by 

a qualified agency.

•  dO make a periodic visual check of pilot and burners. 

Clean and replace damaged parts.

•  dO NOT use this appliance if any part has been under 

water.  Immediately  call  a  qualified  service  technician 

to inspect the appliance and to replace any part of the 

control system and any gas control which has been under 

water. 

•  Ne pas se servir de cet appareil s'il a été plongé dans 

l'eau, complètement ou en partie. Appeler un technicien 

qualifié pour inspecter l'appareil et remplacer toute partie 

du système de contrôle et toute commande qui ont été 

plongés dans l'eau.

IMPORTANT sAFeTY INFORMATION

Содержание VSM-18-1





















Отзывы: