Empire Comfort Systems VFSUE18-1, Инструкция по установке и руководство пользователя

Страница: 3 / 40

31722-1-1213 Page 3
VFSue remote Quick Start Instructions: Cut out this page and keep it near your remote.
Quick Start Guide - Intermittent Pilot Systems
To STArT the Fireplace:
If the pilot is NOT lit:
1. At the same time, press the “OFF” and high flame buttons and release once there is an
audible “beep” sound.
2. The beeping sound will continue for a short time. You may hear a clicking sound around
the same time as these beeps, this is normal.
3. The main burner will ignite approximately 15 seconds after the pilot.
If the pilot IS lit.
1. To ignite the burner, press the high flame button (there will be a beep) for approximately
5 seconds until there is a soft click, then release the button.
To ADJuST the Flame Height
1. Hold down the small flame button. “LO” will be displayed.
2. Hold down the large flame button. Flame automatically goes to high fire. “HI” will be
displayed.
To SHuT OFF the Fireplace
1. To completely shut off the burner and ignitor, press and hold the “OFF” button until the
unit “beeps.” The flames on the burner will go out once any lingering gas is used up.
2. To shut off the burner but keep the ignitor on, push the low flame button (bottom right) for
10 seconds and then release.
FOR MORE INFORMATION, SEE OPERATION INSTRUCTIONS.