Empire Comfort Systems VFLL38FP30LN-1, Инструкция по установке и руководство пользователя, Страница: 8 / 48

29516-2-0912 Page 8
FIREpLACE DIMENSIONS
A
B
C
D
E
F
G H
I
J
K
Figure 1
When planning a fireplace insert installation, it’s necessary to
determine:
• Gas supply piping.
• Electrical connections - for optional light kit
• Electrical supply requirements for optional light.
(120V, 60Hz, 1 Amp)
• Proper opening size of fireplace required for installation of
the fireplace insert.
vF FIREpLACE DIMENSIONS (in inches)
MODEL A B C D E F G H I J K
VFLL38FP 43-1/4 35-1/4 11-31/32 38-1/4 41-5/8 11-15/32 1/2 10-15/16 15/16 21-1/8 13
Figure 2 Figure 3
NOTE: you must use the standoffs that are supplied with the
fireplace. The standoffs are shipped in a flat-state on top of
the fireplace.
1. Locate the two steel standoffs on top of the fireplace.
2. Remove the two screws that secure the standoffs in place;
save the screws.
3. The standoffs have a perforation located in the middle. Bend
them at the perforation.
4. Bend the short tabs on each end in opposite directions. Se-
cure the standoffs to the fireplace top with three screws each
from the hardware bag. There are pilot holes located in the
top of the fireplace for each stand-off. See Figure 2
5. Use pliers to bend the side standoffs 90 degrees. See Figure
3.
6. Locate framing bracket package. Install six framing brackets
with two 10 x 1/2 screws (each). See Figures 2 and 3.