8
Introduction
CG Drives & Automation, 01-6142-01r0
1.5
Standards
The AC drives described in this instruction manual comply
with the standards listed in Table 2. For the declarations of
conformity and manufacturer’s certificate, contact your
supplier for more information or visit www.emotron.com/
www.cgglobal.com.
1.5.1Product standard for EMC
Product standard EN(IEC)61800-3, second edition of 2004
defines the:
First Environment
(Extended EMC) as environment that
includes domestic premises. It also includes establishments
directly connected without intermediate transformers to a
low voltage power supply network that supplies buildings
used for domestic purposes.
Category C: Power Drive System (PDS) of rated
voltage<1.000 V, which is neither a plug in device nor a
movable device and, when used in the first environment, is
intended to be installed and commissioned only by a
professional.
Second environment
(Standard EMC) includes all other
establishments.
Category C3: PDS of rated voltage <1.000 V, intended for
use in the second environment and not intended for use in
the first environment.
Category C4: PDS or rated voltage equal or above 1.000 V,
or rated current equal to or above 400 A, or intended for use
in complex systems in the second environment.
The AC drive complies with the product standard
EN(IEC) 61800-3:2004 (Any kind of metal screened cable
may be used). The standard AC drive is designed to meet the
requirements according to category C3.
By using the optional “Extended EMC” filter the AC drive
fulfils requirements according to category C,
15
15
Option position, communication
N=No option
D=DeviceNet
P=Profibus
S=RS232/485
M=Modbus/TCP
F=Modbus/TCP 2-port, M12
E=EtherCAT
A=Profinet IO 1-port
B=Profinet IO 2-port
G=EtherNet/IP 2-port
16
16
Software type
A=Standard
17
-
Motor PTC.
(Only valid for 003-074/IP54)
N=No option
P=PTC
18
-
Gland kit.
(Only valid for003-074/IP54)
–=Glands not included
G=Gland kit included
19
17
Approval/certification
–=CE approved
D=Marine DNV Product certificate (above 100 kW)
+ CE approved
M=Marine v CE approved
U=UL/cUL approved
Position
for 003-074
Position
for 090-293
Configuration
WARNING!
In a domestic environment this product may
cause radio interference, in which case it
may be necessary to take adequate
additional measures.
WARNING!
The standard AC drive, complying with
category C3, is not intended to be used on a
low-voltage public network which supplies
domestic premises; radio interference is
expected if used in such a network. Contact
your supplier if you need additional
measures.
