Emotron EMX-D, Инструкция по эксплуатации

Страница: 4 / 53

CG Drives & Automation, 01-5139-11r1 1
Addendum
Addendum valid for Emotron EMX-D
This addendum belongs to the instruction manual with document number:
01-5016-01r0 for Emotron EMX-D
Installation of the drive unit (motor plus reduction gear)
• Mount the drive unit.
Attached to the Gearbox you will find a ventilation plug and
a brief “Installation and Maintenance instruction”. Follow
these instructions together with the following:
•
On the gearbox there are three plugs.
Before starting up, remove the plug in highest
position, check the oil level and add oil if necessary.
Use lubricant according to the type plate. Quantity of
lubricant in the gearbox is 0,25 litre.
Fig. 1 Recommended oil level in the gearbox depending on shaft position.
• Now replace the plug you removed with the ventilation
plug (the plug attached to the gearbox) and fasten it.
Fig. 2 Remove the plug in highest position and replace with
the ventilation plug.
Lubricant level (0,25 L)
NOTE: It is important to replace the plug in highest
position with the ventilation plug (included in delivery).
This to prevent oil leakage at thermal changes.