Emotron EMX-D, Инструкция по эксплуатации

Страница: 21 / 53

14 Control Connections Emotron AB 01-5016-01r0
4.2 Terminal connections
The terminal strip for connecting the control signals is
accessible after opening the front panel.
The table describes the default functions for the signals. For
signal specifications refer to chapter 9. page 39.
4.3 Inputs configuration
with the switches
The switch S1is used to set the input configuration for the
analogue input AnIn1, as described in table 5. See Fig. 10
for the location of the switches.
NOTE: The maximum total combined current for outputs
11 is 100mA.
Table 4 Control signals
Terminal Name Function (Default)
Outputs
1 +10 V +10 VDC supply voltage
6 -10 V -10 VDC supply voltage
7 Common Control signal -
11 +24 V +24 VDC supply voltage
12 Common Signal ground
15 Common Signal ground
Digital inputs
8 DigIn 1 RunL (reverse)
9 DigIn 2 RunR (forward)
10 DigIn 3 Not used
16 DigIn 4 Rotation monitor
17 DigIn 5 Priority switch
18 DigIn 6 Max speed
19 DigIn 7 Not used
22 DigIn 8 Not used
Digital outputs
20 DigOut 1 Not used
21 DigOut 2 Not used
Analogue inputs
2 AnIn 1 Control
3 AnIn 2 Not used
4 AnIn 3 Not used
5 AnIn 4 Not used
Analogue outputs
13 AnOut 1 0 - 10V, in proportion to speed
14 AnOut 2 Not used
Relay outputs
31 N/C 1
Relay 1 output
Trip, active when the VSD is in a
TRIP condition.
32 COM 1
33 N/O 1
NOTE: N/C is opened when the relay is active and N/O is
closed when the relay is active.
Table 5 Switch settings
Input Signal type Switch
AnIn1
Voltage (default)
S1
Current
S1
U
I
U
I