Emotron EMX-D, Инструкция по эксплуатации

Страница: 31 / 53

24 Operation via the Control Panel Emotron AB 01- 01-5016-01r0
6.6 Programming example
Following examples shows how to program and make
changes in the settings and values.
The flashing cursor indicates that a change has taken place
but is not saved yet. If at this moment, the power fails, the
change will not be saved.
Use the ESC, Prev or Next keys to proceed and to go to
other menus.
Example 1
Shut off the rotation sensor
Fig. 24 Programming example 1 Turn off Rotation sensor
Example 2
Change purge time
Fig. 25 Programming example 2, Change purge time.
Menu 100 appears
after power-up.
Press Prev for menu
[O00].
Press Enter for menu
[O10].
Press Enter for menu
[O11].
or
Press or key
to change “On” to
“Off”
Save the changed
value by pressing
Enter.
100 Normal
Stp
29,5 rpm
A
PREV
O00 EMX-D option
Stp
ENTER
O10 EMX-D Pars
Stp
ENTER ENTER
O11 Rot Sensor
Stp
On
O11 Rot Sensor
Stp
Off
Flashing
ENTER
O11 Rot Sensor
Stp
Off
Menu 100 appears
after power-up.
Press Prev for menu
[O00].
Press Enter for menu
[O10].
Press Enter for menu
[O11].
Press key4 times
for menu [O15]
or
Press or key
until desired value has
been reached”
Save the changed
value by pressing
Enter.
100 Normal
Stp
29,5 rpm
A
PREV
O00 EMX-D option
Stp
ENTER
O10 EMX-D Pars
Stp
ENTER ENTER
O11 Rot Sensor
Stp
On
NEXT
O15 Purge time
Stp
12
NEXT
O15 Purge time
Stp
10
Flashing
ENTER
O15 Purge time
Stp
10