Emotiva Airmotiv RS13, Руководство пользователя

Страница: 14 / 24

Page 10
AIRMOTIV RS13 R
efeRence
S
ubwOOfeR
®
FUSE
POWER
SERVICE LINE INPUTS BAL IN LOOP OUT
LFE MONO
L R
1 3 2 4
6
5
7
Airmotiv RS13 Rear Panel Connections & Controls
All audio inputs and AC power connections for the Airmotiv RS13 are located on the rear panel.
1. Service Port
The service port is used by the factory to configure the DSP firmware in the RS13.
2. Line Level Inputs
Use the Left and Right Line Level Inputs to connect the RS13 to a line level audio source that
has stereo subwoofer outputs. Use just the Left (L) Line Level Input if your source has a single
unbalanced subwoofer output or LFE output.
3 . Balanced Line Level Input
Use the Balanced Line Level Input to connect the RS13 to a source with a balanced line level
output.
Note: The Airmotiv RS13 has a sophisticated built-in DSP-based crossover system, which offers
flexible configuration options for connecting to a source that provides a stereo or monaural
full range output, or can be bypassed for use with sources that have internal bass management
and offer a subwoofer or LFE output.
Note: In order to minimize input noise, the RS13 detects whether you are using the balanced
or unbalanced inputs when you power it on, and disables the inputs not currently in use. If you
wish to change active inputs you must power cycle the RS13 so that it recognizes the change.