Emotiva Airmotiv RS13, Руководство пользователя

Страница: 16 / 24

Page 12
AIRMOTIV RS13 R
efeRence
S
ubwOOfeR
Airmotiv RS13 Control Panel (top)
X-OVER PHASE LEVEL
X-OVER EQ POWER STATUS
IN DEEP AUTO
OUT FLAT ON
90 Hz -90’
60 Hz 110 Hz
40 Hz 160 Hz 0’ -180’ -20 dB +15 dB
1 3 2
6 5 7
4
X-OVER PHASE LEVEL
X-OVER EQ POWER STATUS
IN DEEP AUTO
OUT FLAT ON
90 Hz -90’
60 Hz 110 Hz
40 Hz 160 Hz 0’ -180’ -20 dB +15 dB
The configuration controls on the Airmotiv RS13 Reference Subwoofer are located under a tinted
plastic cover located near the rear of the top panel. The cover is attached magnetically - simply lift
to remove it and access the controls.
1. X-Over (Crossover Frequency)
This control sets the low-pass crossover frequency for the internal crossover on the RS13. This is
used to configure the smoothest possible blend between the RS13 and your main speakers.
2. Phase
This control allows you to adjust the phase of the acoustic output on the RS13 relative to your
main speakers. This is used to adjust your RS13 so it is “in phase” with your main speakers.
Note: The X-Over and Phase controls only affect the output of the RS13 when the X-Over Switch
is set to In. They have no effect when the X-Over Switch is set to Out, and they have no effect on
the Loop output.
3. Level
This control allows you to adjust the output level on your RS13.