Emos RAP CT KARGO Bange Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 88

Emos RAP CT KARGO Bange Скачать руководство пользователя страница 35

34

Driving aid

Rearview mirror

◆

Before driving the vehicle, be
sure to adjust the angle of the
mirror so that you can see the
side of the car.

◆

Move the edge of the mirror
body by hand to rotate the mirror
around the center to adjust it to
the proper position.

Warning

◆

Please do not adjust the position of the rearview mirror during driving.
Otherwise, it may lead to error of control and accident, resulting in
serious casualties.

Reversing radar

◆

Reversing radar is a radar
detection device installed on
the rear bumper of the vehicle.
During reversing and parking,
the radar probe is used to detect
whether there is any obstacle
behind the vehicle. At the same
time, the buzzer on the reversing
radar main unit is driven to alarm
at a certain frequency to remind
the driver to park safely and avoid collision.

◆

When the gear is pushed to the

“

R

”

position, the controller will beep

once to indicate that it hangs in the reverse gear, and the parking radar
system will enter the working state. Exiting the

“

R

”

gear and the

«
...
33
34
35
36
37
...
»

Содержание RAP CT KARGO Bange

























































































Отзывы:

Нет отзывов