Emos RAP CT KARGO Bange Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 88

Emos RAP CT KARGO Bange Скачать руководство пользователя страница 11

10

Charging method

5. Lift up the dust cover of the

charging port and connect the
charging plug to the charging
port. The instrument lights
up the charging connection
indicator, and the electricity
meter switches to the charging
animation state (the lead
acid version has no charging
animation, and the lithium version has charging animation).

6. When charging is complete, unplug the charging connection plug.

7. Conﬁrm that the dust cover of the charging port is properly closed and

close the charging cover of the vehicle.

8. Disconnect the power plug of the power supply end, arrange the on-

board charging device, and place it properly to complete charging.

Charging pile single-phase AC charging

Charging pile single-phase AC charging method is as follows:
1. Set the ignition switch to the "OFF" position.
2. Press the charging port cover on the left side of the vehicle to open the

vehicle charging port cover.

3. Lift the dust cover of the charging port, push the air switch up (lead acid

version), connect the power plug of the power supply end or the built-in
power plug of charging pile.

4. Connect the charging connection plug with the charging port, set the

charging pile parameters, and start charging according to the setting of
charging pile (such as swiping card).

5. The instrument lights up the charging connection indicator, and the

electricity meter is switched to the charging animation state.

6. When charging is complete, unplug the charging plug.

«
...
9
10
11
12
13
...
»

Содержание RAP CT KARGO Bange

























































































Отзывы:

Нет отзывов