12
`
Clock Setting:
The clock in this display uses 24-hour notation. Please note that the clock will reset
every time you remove the battery of the device.
To set the clock, press the button on the option and use the and buttons to
adjust each value.
The cursor will appear on the first input digit of the hour section, adjust this input
using the and buttons. Press the button to confirm the selection and switch
to the second input digit. Adjust this as well, using the and buttons. Confirm your
selection and switch to the minute by pressing the button.
Repeat this for the remaining input digit of the clock and press the button to save
the setting and exit this option.
Use the button to scroll down to the “Back” option and select it by pressing the
button to exit the display setting menu.
1.8 Password
This option is used to lock the display device and prevent unauthorized access. If
activated, a 4-digit input password will be required to enter the normal user interface
when the device is turned on.
1.8.1 Setting Password
Cycle through the password option using the button and select “ON”. The
display will show an interface to input your preferred password.
Scroll and Select between numbers “0–9” using the and buttons for each
entry slot. Press the button to confirm your selection for each slot. Press the
button again to confirm the inputted password.
You will need to enter the password a second time, repeat the above step and input
the same password. If the password is the same as the previous entry, the system
will display a prompt showing that you have successfully set your password. With
an incorrect entry, you will need to repeat the first step and input the password
and reconfirm.
After correctly inputting the password, the interface will automatically exit to the
password menu.
