11
`
divisions of 3, 5, or 9 levels of the total motor power.
Note: The number of pedal assist levels (3, 5, or 9) you set in your display divides the total
power of the motor among the number of pedal assist levels.
* We highly recommend setting your display to 9 Pedal Assist Levels to have access to
more incremental power levels.
Power View:
This allows you to select your viewing preference for the power of the motor. This may either
be in Watts or in Current (Amps).
SOC View:
This sets how the battery power level is displayed on the screen. The sign can either be
in percentage or in voltage. We recommend using voltage, as this provides a more
accurate gauge of the battery charge level.
TRIP Reset:
This allows you to reset the TRIP readings of the odometer on your display. It is a
one-time
setting and once cleared, your TRIP readings will go back to reading zero.
This reset includes maximum speed (MAXS), average speed (AVG), and single trip distance
(TRIP).
Wheel Size:
This sets the wheel diameter size in inches and should be done before riding your bike. Please
input the correct tire size into the display to enable accurate measurement of speed and other
ride information.
Available Wheel Sizes are:
between
6” to 34”
Speed Limit:
Press the button to select this option and adjust the speed limit to your preference. Press
the button again to save your setting and exit this option. Use the button to scroll down
to the next display setting.
Note: Check your local laws regarding
e-bike speeds. Setting the speed above the legal limit
is not advised. This function may not be available on some models.
AL Sensitivity:
This is used to adjust the back-light dim setting in low light conditions. It will set the light
sensitivity of your device.
Press the button to enter this option and adjust the setting to your preference by using the
and buttons. Use the button to increase the value to the highest (Level 5) and press
the button to reduce it to the lowest value (Level 1). Press it one more time at the lowest
value to turn off this setting.
