emmeti CHRONOTHERMOSTAT, Руководство пользователя для установщика/оператора системы

Страница: 6 / 16

6
IT IT
1. DESCRIZIONE DEI COMPONENTI PROGRAMMING FOR INSTALLER - PLANT MANAGER
GB GB
1 - Access to type “A” parameters
To access type “A” parameters, enter the main menu and press the point
indicated by the arrow in the figure below for 10 seconds.
Afterwards:
- press the various numbers to access the parameters;
- modify the parameters using the keys
and
;
- confirm the modifications by pressing
or
- exit without saving modifications by pressing .
.
AUTO
1
PROG
MAN
20.5
20:30
OFF
2. Access to type “B” and “C” parameters
To access type “b” parameters, enter the main menu, press the button
and keep it pressed at the point indicated by the arrow in the figure
below for 10 seconds.
1
20:30
Afterwards:
- press the various numbers to access the parameters;
- modify the parameters using the keys
and
- confirm the modifications by pressing
or
- exit without saving modifications by pressing .
.
3. List of parameters with 230 V power supply ver-
sion
A1 - Holiday program
A2 - Operation limitation on telephone control
A3 - Diversified heating/air conditioning time programming
A4 - Choosing operating mode on telephone actuator
A5 - Blocking or limiting operating temperature modification
A6 - Correction of thermometer error due to installation
A7 - Setting system type
b1 - Blocking time reprogramming by user
b2 - Blocking or limiting “forced” operation
b3 - Blocking “manual” operation
b4 - Blocking or limiting operating temperature modification + control A5
b5 - Correction of thermometer error due to instal control A6
b6 - Modification of system switch-on differential
b7 - Pump / motorised valve anti-seizing function
C1 - Setting minimum system switch-on time
C2 - Setting system type + control A7
C3 - Temperature measurement unit selection
C4 - Antifreeze temperature selection
C5 - Acquisition of menu A competences
C51 = A1
C52 = A2
C53 = A3
C54 = A4
C6 - Centralisation of Summer/Winter switching via telephone actuator
4. List of parameters with battery power supply
version
A1 - Holiday program
A3 - Diversified heating/air conditioning time programming
A5 - Blocking or limiting operating temperature modification
A6 - Correction of thermometer error due to installation
A7 - Setting system type
b1 - Blocking time reprogramming by user
b2 - Blocking or limiting “forced” operation
b3 - Blocking “manual” operation
b4 - Blocking or limiting operating temperature modification + control A5
b5 - Correction of thermometer error due to instal control
A6
b6 - Modification of system switch-on differential
b7 - Pump / motorised valve anti-seizing function
C1 - Setting minimum system switch-on time
C2 - Setting system type + control A7
C3 - Temperature measurement unit selection
C4 - Antifreeze temperature selection
C5 - Acquisition of menu A competences
C51 = A1
C53 = A3
C7 - Selection of last switching position of relay in case of shutdown