This section applies to following products:
Duo combi Classic 3-in-1, Edge 3-in-1, Smart 3-in-1 and sport stroller
6
8
7
9
9
10
11
12
43
Manual Duo Combi v 3.1
English
• Fold the chassis by pulling the two main locking devices, one on
each side, upwards.
NOTE:
Seat unit is removed from the illustration to clarify the instruction.
• Lift the safety catch and fold the handle forward.
IMPORTANT
• Make sure no fabric parts get caught in between handle and seat
unit.
NOTE:
Seat unit is removed from the illustration to clarify the instruction.
• Fold the backrest from its upright position into full layback posi-
tion, then push the hood towards the backrest.
• To make stroller even more compact, remove wheels by pressing
the wheel hub release buttons and pulling the wheels off the axle.
IMPORTANT
• Wipe off any dirt or sand from axle stubs before reattaching
wheels.
Folding the stroller- Classic chassis ( For Sport chassis see page 38)
• Engage the parking device. Adjust the backrest into it’s upright
position (9). Fold the hood completely towards the front bar of
the seat unit (10). Adjust footrest to “an above horizontal posi-
tion”.
WARNING
• No child is to be placed in the vehicle when folding or unfolding
the vehicle
How to use the vehicle
Use of the raincover
• The raincover is attached by placing the raincover over the carry-
cot and seat-unit.Please note there is an opening in the raincover
near the hood opening. Use the raincover that is supplied with
the pram.
• Always use the raincover when it’s raining or snowing. If the pram
is damp before the raincover is attached, wipe off the fabrics first
if possible.
• Make sure the raincover is completely dry before it is placed back
into it’s bag.
