1
2
This section applies to following products: Duo combi
Classic 3-in-1, Smart 3-in-1 and sport stroller
6
7
5
4
3
Manual Duo Combi v 3.1
34
2
3
4
1
Assembly of Classic / Smart Chassis
• The Safety catch (6) will become engaged only if the main lock-
ing devices (7) are not correctly in position. This is to prevent
accidental folding.
WARNING
• Always check that the main locking devices (7) are engaged cor-
rectly before using your pram, it is dangerous to use your vehicle
without these in their correct position.
Assembly of Chassis
• Engage the parking device (3). Unfold and extend chassis by
pulling up on the handlebar (5) while holding down on the chas-
sis side-bar (4)
WARNING
The chassis-locks (7) must click into locked position.
• Make sure the parking device is not engaged. Depress release but-
ton (2) on wheel hub (1), slide the wheel all the way onto axle.
Release button and pull wheel toward you until you hear a click.
WARNING
• Pull wheel outwards to be sure wheel is locked on.
Repeat the procedure on each of the four wheels.
Attaching Wheels
• Remove plastic protectors from chassis axles.
Save for future use.
IMPORTANT
• Axles may be covered with axle grease, and can leave stains on
fabric.
WARNING
• Choking Hazard - Keep plastic protectors away from children.