This section applies to sport stroller
38
Manual Duo Combi v 3.1
8
9
10
4
11
5
6
7
8
8
Folding of the pram
• If the vehicle is used with a carry-cot, remove it first.
• Start by making sure that the handle is on the same side as safety
catches (10) and that the brake is engaged.
• Adjust the height of handle to the its lowest position (to make
sure that the chassis does not take too much space).
• Release the safety hooks (10) by pulling these up towards you.
• Push the safety catch (4) and fold the handle forward.
IMPORTANT
• Before this step is done the carry-cot needs to be removed.
• The tray is assembled when delivered but can be removed to be
washed. The elastic (11) has to be parallel with the wheels on the
side of the chassis.
Newton Safety Catch
• Your pram is equipped with a Newton safety hook. The hook is
an extra safety detail which prevents involuntary movement of
the handle.
To reverse the handle
• You can move the handle over to the other side of the vehicle to
change the child’s sitting direction.
• Engage the brake
• Adjust the handle to its highest position. Loosen the handle by
pulling the black plastic parts (8) towards you. Push the handle
over to the other side (9) carefully. The handle can then be
moved about 3 cm before the hook catches on and prevents the
handle from moving forward. Release the hook by pulling it up
and move it the way shown in the picture 5. Make sure that the
plastic parts are locked securely on both sides.
• Adjust the handle to the desired handle height. Please note the
adjustment of the latches (6) is now done the opposite way (see
adjusting the handle, pictures 4-5).
IMPORTANT
• Make sure that the area is clear when reversing the handle. Your
child’s safety is your responsibility.
assembling and using the Sport chassis
