5. Specifications
51
Equipment use
Housing & Mounting
Panel Cut-Out
Protection
Weight
Environmental rating
Operating/Storage Temperature
Operating/Storage Humidity
Installation Over Volt. Category
Pollution Degree
Mode of Operation
Cranking Dropouts
Battery Voltage Measurement
Mains Voltage Measurement
Mains Frequency
Generator Voltage Measurement
Generator Frequency
CT secondary
Communication interface
Relay Outputs
Transistor Outputs
: Electrical control equipment for generating sets.
:111 mm x 81 mm x 61 mm. (including connectors)
.
: 81mm x 70mm.
:
: Approximately 0,3 Kg.
:
with non-condensing humidity
: -20°C to +70°C / -30°C to +80°C
: 90 % max. (non-condensing)
: II Appliances, portable equipment
: II, Normal office or workplace, non conductive pollution
: Continuous.
: 8 to 32 V
. Max. operating current is 360 mA.
: Battery voltage can be “0” VDC for max. 50 ms during
cranking (battery voltage should be at least nominal
voltage before cranking).
: 8 to 32 V
, accuracy: 1 % FS, resolution: 0,1 V
: 3
Resolution: 1 V.
: 5 to 99.9Hz (min. 20 VAC Ph-N) Accuracy: 0,25 % FS,
Resolution: 0,1 Hz.
: 3
Resolution: 1 V.
: 5 to 99.9Hz (min. 20 VAC Ph-N) Accuracy: 0,25 % FS,
Resolution: 0,1 Hz.
: 5A.
: RS-232
: Generator contactor relay output 8A 250V
Mains contactor relay output 8A 250V
: Start or Configurable output-1 1A at DC supply voltage
Configurable output-2 1A at DC supply voltage
Configurable output-3 1A at DC supply voltage
Configurable output-4 1A at DC supply voltage
Configurable output-5 1A at DC supply voltage
Configurable output-6 1A at DC supply voltage
All transistor ouputs supplied from DC supply terminal 12
. Plastic
housing for panel mounting
IP65 at front panel.
Standard, indoor at an altitude of less then 2000 meters
.
to 300 VAC Ph-N, 5 to 99.9 Hz. Accuracy: 1 % FS,
to 300 VAC Ph-N, 5 to 99.9 Hz. Accuracy: 1 % FS,
DC Battery Supply Voltage
Z
Z
@
@
V
V
