EMKO Proop Series, Руководство пользователя

Страница: 16 / 24

PROJECT LOADING
Ÿ
We can upload the program we made in the editor software to the HMI panel with
PC or USB memory.
Ÿ
Installation via PC can be done over Ethernet for devices with USB or Ethernet
ports.
Project installation selection is made through the Proop PC connection section by
following the "Project / Project Settings" path in the editor software.
Ÿ
When the connection type is selected as Ethernet, the IP number of our device
should be written in the Target IP address section of the project settings.
15
Ÿ
The firmware and update information can be accessed from the About tab. There
is firmware version information installed on the device in the application section.