EMKO PID QUADRO EPLC9600, Руководство пользователя, Страница: 30 / 45

30
Parameter
CHANNEL-1 SAMPLE TIME
Address
42034
CHANNEL-2 SAMPLE TIME 42046
CHANNEL-3 SAMPLE TIME 42058
CHANNEL-4 SAMPLE TIME
42070
Parameter
CHANNEL-1 SET MINIMUM
Address
42035
CHANNEL-2 SET MINIMUM 42047
CHANNEL-3 SET MINIMUM 42059
CHANNEL-4 SET MINIMUM 42071
Parameter
CHANNEL-1 SET MAXIMUM
Address
42036
CHANNEL-2 SET MAXIMUM 42048
CHANNEL-3 SET MAXIMUM 42060
CHANNEL-4 SET MAXIMUM 42072
Parametre
CHANNEL-1 TUNE (1.A/2.S)
Address
42041
CHANNEL-2 TUNE (1.A/2.S) 42053
CHANNEL-3 TUNE (1.A/2.S) 42065
CHANNEL-4 TUNE (1.A/2.S)
42077
Parametre
CHANNEL-1 SOFT START
Address
42039
CHANNEL-2 SOFT START 42051
CHANNEL-3 SOFT START 42063
CHANNEL-4 SOFT START 42075
Parametre
CHANNEL-1 ALARM TYPE
Address
42079
CHANNEL-2 ALARM TYPE 42083
CHANNEL-3 ALARM TYPE 42087
CHANNEL-4 ALARM TYPE 42091
PID Sample Time Parameters
Modbus Addresses
PID Minimum Set Value Parameters
Modbus Addresses PID Soft Start Parameters
Modbus Addresses
PID Tune Selection Parameters
Modbus Addresses
PID Maximum Set Value Parameters
Modbus Addresses
Alarm Type Selection Parameters
Modbus Addresses
*
( )
*
( )
*
( )
*
( )
*
( )
*
( )
*
( )
*
( )
*
( )
*
( )
*
( )
*
( )
These parameters are displayed on LCD screen with point, so that the parameters values
are 10 times than the real values for modbus function.
*
( ) ii
If no operation is performed for 20 seconds in technician parameters section, device turns to
main operation screen automatically.
ii