4.3 Accessing To The Technician Parameters
23
RESET
PROG
TEST
°F
V
L12
GEN V.
V
L23
V
L31
RESET
PROG
TEST
°F
V
L12
GEN V.
V
L23
V
L31
RESET
PROG
TEST
°F
V
L12
GEN V.
V
L23
V
L31
RESET
PROG
TEST
°F
V
L12
GEN V.
V
L23
V
L31
P00
: Mains Voltage
Connection Level
RESET
PROG
TEST
°F
V
L12
GEN V.
V
L23
V
L31
RESET
PROG
TEST
°F
V
L12
GEN V.
V
L23
V
L31
RESET
PROG
TEST
°F
V
L12
GEN V.
V
L23
V
L31
Not2:
User can access to all
parameters (
).
P00 to P29
TECHNICIAN PASSWORD
When the button is
pressed for
seconds,
password is asked for
accessing to parameters.
5
User can access to technician
parameters by entering technician
password. This selection is done with
increment and decrement buttons.
Press the Enter button.
Press the increment
button.
Enter password
with increment and
decrement buttons.
Not1:
If Enter button is pressed
and the technician password is
zero,
screen is ignored
and
is shown.
screen
Press the Enter button to
confirm password. If the
password is incorrect,
the unit will drop out of
program mode.
Not3:
When
screen is
shown, parameters can be
seen by pressing Enter button
without entering operator
password. But user can not
change the parameters.
Press the increment button to
access to the parameter value.
Operation Screen
Programming can be carried out only while the unit is in
mode. Press the OFF (17)
button. If the engine is running, it will stop and the LED (6) lights on. Then proceed as follows:
OFF