20
Number Comment
11
The button is used for changing operating mode of the unit to the TEST Mode.
The unit changes operating mode to the TEST Mode and LED (1) is lit when this
button is pressed.
13
14
17
18
19
20
12
The LAMP TEST function of the unit is operated and entered in the Programming
Mode by using this button. The LAMP TEST function operates when the button is
pressed first. When the button is pressed and keeping pressed for 5 seconds the
unit is passed to the PROGRAMMING Mode and LED (2) is lit at the same time.
15
The button is used for transferring the load to the mains only in MANUAL mode.
16
The button is used for transferring the load to the generator. It is active only in
Manual Mode.
21
The button is used for disconnecting the load from the mains. It is only active
when the unit is in MANUAL Mode.
22
The button is used for disconnecting the load from the generator. It is only active
when the unit is in MANUAL Mode.
23
Alternate Display Mode Button. It is used for rotating between parameters and
approving of the values, of the unit and displays. See section 4 and Section 6.1
24
Multi Function Display. It is used for Programming the Unit and features
explained in section 6.
25
Failure Indicators. Detailed information about this subject is explained in
section 6.2.
The button used for starting the engine when the unit is in the MANUAL Mode.
The LED (3) is lit when the button is pressed. It is only active when the unit is in
MANUAL Mode.
The button is used for changing operating mode of the unit to the OFF Mode. The
unit changes operating mode to the OFF Mode and LED (6) is lit when this button
is pressed.
The button is used for changing operating mode of the unit to the AUTO Mode.
The unit changes operating mode to the AUTO Mode and LED (7) is lit when this
button is pressed.
It runs as HORN SILENCE and DECREMENT button. The button, in the normal
conditions runs for HORN SILENCE if the horn is running purpose when any failure
is detected, it works decreasing values of parameters in PROGRAMMING Mode.
The button is used for stopping the engine when the unit is in the MANUAL
Mode. The LED (8) is lit when the
button is pressed. It is only active when the unit is in MANUAL Mode.
It runs as INCREMENT and FAILURE RESET button. The button, in the normal
conditions runs for FAILURE RESET purpose when any failure is detected, it
works increasing values of parameters in PROGRAMMING Mode.
26
Generator voltage okay led.
27
Mains voltage okay led.