•
Disconnect both AC and DC power from the SPG before attempting any maintenance or cleaning or working on
any circuits connected to the SPG. See note below.
•
Do not operate the SPG with damaged or substandard wiring. Make sure that all wiring is in good
Condition and is not undersized.
ELECTRICAL SHOCK HAZARD
DANGER
STATEMENT OF HAZARDS:-
Contains statements of avoidance or Strict Compliance. Failure to follow these Instructions will
result in death or serious Injury.
Failure to follow these instructions will result in death or serious injury
NOTE: Turning off the SPG using the on/off switch on the front panel will not reduce an electrical shock hazard.
FIRE AND BURN HAZARD
•
Do not cover or obstruct the air intake vent openings and/or install in a zero-clearance
compartment.
•
Do not use transformer less battery chargers in conjunction with the
SPG due to overheating.
Failure to follow these instructions will result in death or serious injury
EXPLOSION HAZARD
•
Charge only properly rated (such as 12V/24V) lead-acid (GEL, AGM, Flooded,) rechargeable batteries
because other battery types may explode and burst.
•
Do not work in the vicinity of lead-acid batteries. Batteries generate explosive gases during normal
operation. See note #1.
•
Do not install and/or operate in compartments containing flammable materials or in locations that
require ignition-protected equipment.
•
Failure to follow these instructions will result in death or serious
3
