EMIT ETS1, Инструкция по эксплуатации

Страница: 3 / 25

ETS1 ver. 1.22
When you use the emiTag system, the ETS1 represents Emit’s split time station. The
ETS1 replaces the traditional clock and registers the time when the emiTags pass the
eLine circuits, internal or external. The competitor’s tag ID and time are transmitted
from the tags and back to the ETS1 via an internal radio antenna. The data is saved
locally before it is transferred to a PC via USB, RS-232, RS-485 or GPRS.
The ETS1 and the emiTags may be used for timing registering split times in various
sports. The system is now actively in use in cross country skiing, biathlon, ski
orienteering, cycling (road racing, time trials, off road, track cycling), running,
triathlon, etc.
You may control/configurate the ETS1 from a computer or with the built-in keyboard
with 6 variable menu keys and a numeric keyboard. The ETS1 has 5 LEDs (light
emitting diodes) and a graphic display which shows current information. The LEDs
change colour depending on the status of the event it is connected to.
You may use the ETS1 connected to the internal eLine loop or with up to two external
eLine loops. The accuracy is better when you use two loops (ca. 1/100 second
depending on the speed). When you use one loop the accuracy is about 1/10 second.
Note that the range of the internal eLine loop only is 3 metres.
Equipment included:
The ETS1 is delivered with the following equipment:

One single eLine loop. The loop is long enough to cover a 9 m wide track. In
addition you get 5 m power cable. If you have a stationary construction you
should run a cable in a tube under the ground and buy extra cables in the
exactly right length.
 Power cable

USB cable

CD with USB driver and various aid programs

This user’s guide
Page
3