Emist EPIX360 Скачать руководство пользователя страница 7

EN

Copyright ©2021 EMist, a MasVida Health Company. All rights reserved. All product names, logos, and brands are 

property of their respective owners. Prices are in U.S. Dollars. Prices are subject to change. All use of the website 

and resources is subject to the Terms of Use. EMI-018-21 Multilingual Manuals - 110321

7

Storage Case

6

5

7

1

4

2

3

1. Electrostatic Sprayer:

 a cordless, handheld electrostatic sprayer that is 

powerful, durable and provides breakthrough disinfectant application performance. 

2. Tank:

 Interchangeable liquid tank includes liner with cap washer, cap with strain 

filter and tank cap cover. The tank was specifically designed to fit securely onto the 
sprayer and is easy to use. The tank has a tab along the threads to keep a user 
from over rotating the tank cap. Please Note: a small amount of water may reside 
in the tank when first used as a result of quality control testing. When switching 
tank liners, also move the removable rubber liner ring to the new liner to be used. 
This ring ensures proper fit and seal of tank cap assembly to the tank.

3. Liquid Tank Liners:

 The purpose of our disposable tank liners is to provide all 

directional spraying and the ability to use all the disinfectant within the tank. Our 
tank liners are manufactured to be used up to 100 hours or 3 months before an 
actual liner must be replaced. 

4. Tank Cap Assembly:

 The tank cap assembly comes with the cap, a check 

valve, O-ring and strain filter. This cap is designed to fit securely onto the tank. The 
cap has a tab in order to stop over rotation onto the tank.

5. Tank Cap Cover:

 The cap cover is the main piece that locks the tank in place 

on the sprayer along with the clip on the back of the unit. This allows for all 
directional spraying, including upside down, when needed. 

6. Rechargeable Battery:

 The system comes with 2 14.4v lithium ion batteries. 

Each has a 3-bar green indicator light to determine charge. If the battery shows no 
bars, place on the charger for recharging.  

7. Battery Charger:

 The battery charger comes with 110-120v standard plug. It 

takes approximately 45 minutes to recharge a battery. International charger cables 
are available for purchase upon request.

INITIAL INSPECTION & SET UP - INVENTORY 

Содержание EPIX360
















Отзывы: