Emist EPIX360, Руководство пользователя, Страница: 10 / 15

EN
Copyright ©2021 EMist, a MasVida Health Company. All rights reserved. All product names, logos, and brands are
property of their respective owners. Prices are in U.S. Dollars. Prices are subject to change. All use of the website
and resources is subject to the Terms of Use. EMI-018-21 Multilingual Manuals - 110321
10
1. EMist recommends the use of disinfecting products on EPA’s
Disinfection List N that are approved for electrostatic application.
2. Begin at the farthest point from the doorway and work back toward
the doorway so you can step out when application is complete.
3. Aim applicator 24”-36” (optimal distance) from the surface target
area and begin with a smooth figure “S” movement aiming below,
at, and above the surface target area while walking at an average
pace (continuously moving).
4. Make sure you are working in a methodical “S” pattern and let your
passes overlap when moving to the next surface target area.
5. Allow treated area to sit for contact time as recommended by the
chemical manufacturer’s label before re-entry into the area.
B. SPRAY APPLICATION PROCESS:
1. Make sure food and drinks are removed or covered before
application.
2. Spotless, clean interiors require no prep work prior to application.
3. Loose debris should be swept from floors and other surfaces prior
to application.
4. Inspect the area for mechanical barriers such as: magazines
on table tops, chairs touching each other, a table or a wall.
The intended target surface area for application will need to be
accessible.
5. Please cover and remove valuables. Electronics, furniture, paper
or other common necessities do not need to be removed from the
area.
6. Once the area has been cleaned, application can begin.
7. This system is NOT a mechanical cleaner.
A. PREPARING THE SPRAY AREA:
TIP: IF THE APPLICATOR BECOMES WET OR BEGINS
TO DRIP, YOU ARE MOVING TOO SLOWLY OVER THE
SURFACE TARGET AREA AND NEED TO SPEED UP THE
APPLICATION PROCESS. DO NOT OVER-SATURATE THE
SURFACE. IF YOU SEE RUNS OR PUDDLES YOU ARE
APPLYING TOO MUCH CHEMICAL. THE GOAL IS TO
ACHIEVE EVEN COVERAGE OVER THE TARGET SURFACE
AREA.
SPRAY APPLICATION