Emist EPIX360 Скачать руководство пользователя страница 3

EN

Copyright ©2021 EMist, a MasVida Health Company. All rights reserved. All product names, logos, and brands are 

property of their respective owners. Prices are in U.S. Dollars. Prices are subject to change. All use of the website 

and resources is subject to the Terms of Use. EMI-018-21 Multilingual Manuals - 110321

3

• Read and fully understand the EMist Electrostatic Sprayer Operators 

Manual prior to using the electrostatic sprayer.

• EMist 

Tru

Electrostatic Sprayers should never be used in a hazardous 

environment.

• EMist Electrostatic Sprayers should never be used in an area 

containing volatile chemicals. Nor should it be used in any area 

containing volatile or explosive levels of gas, vapor or particulates.

• EMist Electrostatic Sprayers should never be used by untrained 

personnel.

WARNINGS

 

Warnings

Please read the manual carefully and pay special attention to the 

symbols and warning labels. Warning labels indicate a potentially 

hazardous situation which, if not avoided, could result in serious injury 

or death.

SAFETY NOTICES

This manual contains information that is important for you to know 

and understand before operating the EMist Electrostatic Sprayer. This 

information relates to protecting your safety and ensures product 

reliability and performance. 

It is the owner’s responsibility to ensure 

that all who operate this equipment read this manual.

This appliance is not intended for use by persons (including children) 

with reduced physical, sensory or mental capabilities, or lack of 

experience and knowledge, unless they have been given supervision or 

instruction concerning use of the appliance by a person responsible for 

their safety.

WARNINGS

 

• To install, slide the battery pack onto the bottom of the EPIX360

™ 

handle until the battery pack is firmly seated.

• To remove, grasp battery pack firmly, depress battery pack button 

down, and slide out from the EPIX360

 USB power source.

• Do not short-circuit the battery supply terminals.

• Remove the battery from the unit when the unit is not in use.

WARNINGS

 

Содержание EPIX360
















Отзывы: