24 |
ENGLISH
1.
Log in to the webpage of the router with ‘http://192.168.8.1’
2.
Go to ‘Network’ under ‘Advanced Setup’ and then click ‘LAN/DHCP Server’.
3.
For example alter the IP-address to ‘192.168.6.1’
4.
Click ‘Apply & Restart’ to save the settings.
5.
From now on, the wLINK 300 is accessible on the following address:
‘http://192.168.6.1’
Q: I would like to know my local (computer) IP address. How do I obtain this
address?
A: To obtain the IP address, follow the steps below.
Steps for Windows XP/2000 and Windows Vista:
1.
Click ‘Start’.
2.
Click ‘Run’.
3.
Enter ‘cmd’.
4.
Press the enter key or click ‘OK’.
5.
Enter ‘ipconfig’.
6.
Press the enter key.
7.
You will now see the local IP address.
Steps for Windows98/ME:
1.
Click ‘Start’.
2.
Go to ‘Run’.
3.
Enter ‘winipcfg’.
4.
Press the enter key or click ‘OK’.
5.
You will now see the IP address or Automatic personal address.
Q: How do I reset the wLINK 300?
A: On the back of the router you will find a small reset hole. Push it down and hold it
down for about 10 seconds. The RUN LED will start to blink rapidly. Soon after,
this led will stop blinking after which it will turn off. The router has now been reset
to factory default and will be restarted.
10.0 Service and support
This users manual has been carefully written by Eminent’s technical experts.
If you have problems installing or using the product, please fill out the support form at
the website www.eminent-online.com/support