14 |
ENGLISH
A 2
nd
wLINK 300 as signal repeater
6.1 Connecting the wLINK 300 signal booster (2)
1.
Turn off your computer.
2.
Connect the wLINK 300 to a wall outlet using the supplied power adapter.
3.
Connect the supplied UTP network cable to the ‘LAN 1’ port of the wLINK 300.
4.
Connect the other end of the UTP network cable to the network adapter of your
computer.
Is my wLINK 300 correctly connected to the wall outlet? You can check this by
verifying that the POWER LED is on.
6.2 Configuring the wLINK 300 signal booster (2)
1.
Turn on your computer.
2.
Open your internet browser (e.g. Internet Explorer, Netscape of Firefox).
3.
Type ‘http://192.168.8.1’ in the address bar.
4.
Press the ‘Enter key’ or click ‘Go to’.
5.
You will now be asked for a ‘Username’ and a ‘Password’. Fill in ‘admin’ in the
‘Username’ field and ‘admin’ in the ‘Password’ field and press the enter key.
6.
The login screen is shown.
7.
Click ‘Setup Tool’.
8.
Click ‘Advanced Setup’ in the left menu.
9.
Click ‘Network’ in the left menu.
10. Click ‘LAN/DHCP Server’.
(1)
(2)