Eminent EM4483, Руководство пользователя

Страница: 6 / 19

6 |
ENGLISH
8. If you want to assign an IP address to the camera yourself, select ‘Fixed’ in the
‘IP Address’ field.
9. Enter the preferred IP address in the ‘IP’ field.
Example: If your router uses the IP address 192.168.0.1, then change the IP address
of the camera to 192.168.0.100.
10. Enter the correct subnet mask in the ‘Netmask’ field.
11. Enter the IP address of your router in the ‘Gateway’ field.
12. If you wish to change the password of the camera, then enter the new password
in the ‘New Password’ field.
13. Enter the new password once more in the ‘Confirm Password’ field.
14. Click ‘Save’ to save the settings.
Write down the addresses and the password that you set up:
IP Address
________________________________________________________
Netmask ________________________________________________________
Gateway ________________________________________________________
Password ________________________________________________________
3.4 Logging in to the camera
The camera can now be accessed using the IP address that you assigned to the
camera or that the camera has received from your router. Follow the instructions
below to log in to the camera.
1.
Open Internet Explorer.
2. Enter the IP address you set in chapter 3.3 in the address bar of the browser (for
instance 192.168.0.100).
3. Press the enter key or click ‘Go to’.
4. The home page is shown.
5. The message ‘Click here to install the following ActiveX Control…’ will appear.
6. Click this message with the left mouse button and choose the option ‘Install
ActiveX Control…’.
7. A security warning will appear. Click ‘Install’.
8. If needed, click the center of the screen with the left mouse button to activate the
ActiveX Control.
In the center of the screen you will now see the image of the camera. Left of the image
there are 4 buttons, underneath which you will find a speaker-symbol and 3 indication-
lights. Follow the steps below to finish the configuration of the camera for your
network: