Eminent EM4483, Руководство пользователя

Страница: 11 / 19

11 |
ENGLISH
1.
Click ‘User’ in the left menu.
2. Click ‘Add’ under the header ‘User List’. A number of new options will appear.
3. Enter a made-up username in the ‘User Name’ field.
4. Enter a made-up password in the ‘Password’ field.
5. Re-enter the same password in the ‘Confirm Password’ field.
6. Choose the type of user in the ‘User Group’ field. If you choose ‘User’, the user
can only view the images of the camera after logging in to the page. If you
choose ‘Administrator’, the user can also adjust the settings of the camera after
logging in.
7. Click ‘Save’. The new user will now appear in the field under ‘User List’.
The new user can now access the camera from within the network as described in
chapter 3.4, steps 1 through 4 and through the Internet as described in chapter 3.6.
5.0 Using motion detection
The EM4483 is equipped with built-in motion detection which allows the device to be
used as a security camera. It is possible to let the camera send an image to an FTP
server or e-mail address the moment a movement is detected. Follow the steps below:
5.1 Enabling motion detection
1. Open your Internet browser (for instance Internet Explorer, Netscape or Firefox).
2. Enter the IP address you set in chapter 3.3 in the address bar of the browser (for
instance 192.168.0.100).
3. Press the enter button or click ‘Go to’.
4. The opening screen is shown.
5. Click the third button from above, depicting a wrench (Settings).
6. Enter ‘admin’ in the ‘Username’ field.
7. Enter the password you set in chapter 3.3, step 12 in the ‘Password’ field.
8. Click ‘Ok’.
9. Click ‘Advanced’ in the left menu.
10. Click ‘Alarm’.
11. Check ‘Enable Motion Detection’.
12. Click ‘Save’ to save the settings.
The motion detection is now enabled. That means the camera can now detect motion
within its point of view and therefore can act as a security camera. It is possible to let
the camera send an image to an FTP server or e-mail address the moment the
camera detects movement. Follow the instructions below to use this option:
5.2 Sending an image to an FTP server
1. Open your Internet browser (for instance Internet Explorer, Netscape or Firefox).