Eminent EM4483, Руководство пользователя

Страница: 5 / 19

5 |
ENGLISH
network. Make sure you have all the information about your network at hand. Consult
the manual of your modem or router to obtain this information.
3.1 Connecting the camera
1. Connect the power adapter to the camera and plug it into a power socket.
2. Connect the camera to your network using the provided network cable. This can
be a switch, router or modem.
3.2 Installing the camera software
To be able to connect the camera to your network the IP address of the camera has to
be changed. On the CD-ROM you will find software that can detect the camera. After
detection you can adjust the settings of the camera to your network. You will first need
to install the software. Follow the steps below:
1.
Insert the supplied CD-ROM into the CD-ROM or DVD drive of your computer.
2. Select the preferred language.
3. Click ‘Next’.
4. Select ‘Install Camera Software’.
5. Click ‘Next’.
6. Click ‘Next’.
7. Click ‘Next’.
8. Click ‘Close’ to finish the installation.
Hint: If the CD-ROM does not start automatically, you can also start the installation
program manually. Follow the instructions below:
1.
Click ‘Start’.
2. Click ‘Run’.
3. Type x:\wizard\wizard.exe (x is the drive letter of your CD-ROM or DVD station).
4. Click ‘OK’.
3.3 Configuring the camera for your network
After the installation is finished you can open the software to detect the camera:
1.
Click ‘Start’.
2. Click ‘All Programs’.
3. Click ‘EM4483 Network IP Camera’.
4. Click ‘EM4483 MPEG 4 Master’. The program MPEG4 Master will open.
5. Click the ‘Search’ button. An IP address will appear in the left field.
6. Enter a name for the camera in the ‘Name’ field.
7. If you want the camera to receive an IP address from your router, then select
‘DHCP’ in the ‘IP Address’ field. Continue to step 8.