27
PN 20009722 REV F, [08/01/2020]
CAW INFRARED CONTROL SYSTEM - SETTINGS
Item
Setting
Values
Overview
To access: Press and hold PROGRAM and CLOCK buttons simultaneously 3 seconds; use arrow keys to select position;
save selection and exit by repeating button press.
Quick copy — Hold FAN and PROGRAM buttons 3 seconds to copy current day’s settings to all other days.
Navigating through settings: Press PROGRAM to move to next setting or CLOCK to move to previous setting; to
change values, use UP and DOWN keys; when value is reached, move to next setting using PROGRAM or CLOCK button;
values are stored on exit from programming mode.
7-Day
Programming
(See Table 4,
Page 30 to record
settings)
Day of week
Mon, Tue, Wed,
Thu, Fri, Sat, Sun
Louver is closed when fan is off.
Period of day
Morning
Day
Evening
Night
Periods provide four time settings to initiate change in cooling/
heating setpoints.
Allow adjustments for setback (such as night setback, daytime
setback and occupied settings for residential applications).
Set hour/minute for each time as well as cooling and heating
setpoints below.
Hour
0–12 a
0–12 p
Set time to begin period.
Minute
0–59
Cooling
setpoint
55–90 F
Default setpoint when set to Cooling in pre-programmed run
mode.
Heating
setpoint
55–90 F
Default setpoint when set to Heating in pre-programmed run
mode.
Auto setpoint
55–90 F
Unit default setpoint when set to Auto in pre-programmed run
mode. (Unit auto change over between heating and cooling.)
Figure 39
- 7-Day Programming Options For CAW
