Emerson WELLAND CF610VNB00, Руководство пользователя

Страница: 5 / 72

5
emersonfans.com
Please contact 1-800-654-3545 for further assistance
E.T.L. Model No.: CF610
3. Ceiling Fan Assembly
BOTTOM
FOAM PAD
FAN ASSEMBLY
Figure 1
3.2
Remove the fan assembly from the protective
plastic bag. Place the fan assembly into the bottom
foam pad with the bottom of the fan assembly motor
facing up (Figure 1).
The bottom foam pad serves as a holder for the fan
during the first stages of assembly.
3.3
Remove the shipping spacers and the spacer
attachment screws from the motor before installation of
blade assemblies (Figure 2).
Discard the spacers and spacer screws.
FAN ASSEMBLY
SHIPPING SPACER
SHIPPING SPACER
SCREW
Figure 2
Turning off wall switch is not sufficient. To avoid
possible electrical shock, be sure electricity is turned
off at the main fuse box before wiring. All wiring must
be in accordance with National and Local codes and
the ceiling fan must be properly grounded as a
precaution against possible electrical shock.
WARNING
!
3.1
Disconnect electrical power to the branch circuit at the
circuit breaker or fuse box before attempting to install
the ceiling fan mounting plate on the outlet box.
BP7495 CF610 Welland.qxp_ BP7495 3/10/15 4:21 PM Page 5