Emerson WELLAND CF610VNB00, Руководство пользователя

Страница: 11 / 72

11
emersonfans.com
Please contact 1-800-654-3545 for further assistance
E.T.L. Model No.: CF610
3. Ceiling Fan Assembly
(Continued)
HANGER BALL
PIN
4.5" DOWNROD
SETSCREW
Figure 16
3.17
Route the three 80” motor leads through the hanger
ball.
Reinstall the hanger ball (Figure 16) on the downrod as
follows:
Position the hanger ball pin through the two holes in the
downrod and align the ball so the pin is captured in the
groove in the top of the hanger ball.
Pull the hanger ball up tight against the pin and
securely tighten the setscrew in the hanger ball.
NOTE: A loose setscrew could create fan wobble.
HANGER BALL/
DOWNROD
ASSEMBLY
6 to 9
INCHES
Figure 17
3.18
The fan comes with black, blue and white leads that are
80-inches long.
Before installing the fan, measure up approximately
6 to 9-inches above top of hanger ball/downrod
assembly (Figure 17).
Cut off excess leads and strip back insulation 1/2-inch
from end of leads.
BP7495 CF610 Welland.qxp_ BP7495 3/10/15 4:21 PM Page 11