Emerson Vilter VilTech, Руководство по эксплуатации и обслуживанию

Страница: 27 / 174

27
Absolute Pressure Fields
This field is actually a combination of numerical and selectable fields. The selectable or units section of the
field allows the user to adjust the units to select vacuum or non-vacuum ranges.
1. Verify Cursor Type - locate the “ * ” numeric input cursor.
2. Number Keypad - press the number keys that correspond to the number you wish displayed. Use the
decimal and minus keys where applicable. If the numeric field already has the correct data and only the
units need to be adjusted, re-enter the existing numerical data and press
ENTER .
3. ENTER/Arrow Keys - locks in the numerical data and moves the cursor across to the units section of
the field.
4. Verify Cursor Type - locate the “>” selection cursor next to the units section.
5. ENTER - cycles between possible units selections.
6. Arrow Keys - move to the next field and accept the entered data.
7. Errors - If an error occurs because the value entered is out of range the CLEAR key will clear the field
and return the user to the number portion of the field.
Time Fields
The
T
IME
F
IELD
is a special case numerical field used to enter time data.
1. Verify Cursor Type - locate the “*” numeric input cursor.
2. Number Keypad - use the number keys to enter the time you wish displayed. For example, to input the
time 5:59 press 0559, the system automatically moves from hours to the minutes. The “:” is automatically
entered in a time field. This field will allow for whole number acceptance. For example to set the time 8:00
the user may type 08 and press
ENTER . The time on the screen will appear as 08:00.
NOTE : Time fields may be entered in 12-hour or 24-hour format depending on the system configuration. If the system
is in 12-hour format the user will be prompted to select “AM” or “PM” using a selectable field after a
number is entered.
3.
Arrow Keys - move to the next field and accept the entered time.
Date Fields
The
D
ATE
F
IELD
is a special case numerical entry field used o enter the date.
1. Verify Cursor Type - locate the “*” numeric input cursor.
2. Number Keypad - use the number keys to enter the date you wish displayed. For example, to enter the
date 1/1/91 the user would type in 010191, the system automatically moves from the month to the day and
then to the year. The “/” slash symbol is entered for you.
3. Arrow Keys - move to the next field and accept the entered date.