manualshive.com logo in svg

Emerson Smart Wireless Gateway 1420, Справочное руководство

Поделиться
Скачать
Emerson Smart Wireless Gateway 1420 Скачать руководство пользователя страница 8

2.3.1

Prepare PC/laptop

The PC/laptop will need to be configured to form a private network before communicating
to the Gateway. The network settings can be found in the control panel of the PC/laptop.
To configure these settings:

Procedure

1. Find and open the Control Panel (Generally found from the Start Menu).
2. Open Network Connections.
3. Select Local Area Connection or Network and Sharing Center.
4. Right click the mouse and select Properties from the list.
5. Select Internet Protocol (TCP/IP), then select Properties.
6. From the General tab, select Use the following IP address.
7. Set the IP Address to “192.168.1.12” and select Tab.
8. A Subnet mask of 255.255.255.0 should fill in automatically.
9. Select OK to close the Internet Protocol (TCP/IP) window.

10. Select Close on the Local Area Connection window.

2.3.2

Disable Internet proxies

Internet proxies will need to be disabled through the PC/laptop’s default Internet browser.

Procedure

1. Find and open the default internet browser (typically Microsoft Internet Explorer).
2. From the Tools menu, select Internet Options.
3. From the Connections tab, select LAN Settings.
4. Under Proxy Server, verify the boxes for Automatically Detect Settings and Use a

proxy server for your LAN are unchecked.

5. Select OK to close the Local Area Network (LAN) Settings window.
6. Select OK to close the Internet Options window.

Example

The PC/laptop is now set up to form a private network and to communicate with the
Gateway.

Note

Connecting to the Gateway's secondary Ethernet port will require different network
settings. See 

Table 2-1

 for additional network settings.

Table 2-1: Default IP Addresses

 

Gateway

PC/laptop

Subnet

Ethernet 1

192.168.1.10

192.168.1.12

255.255.255.0

Ethernet 2

192.168.2.10

192.168.2.12

255.255.255.0

Ethernet 1 (DeltaV Ready)

10.5.255.254

10.5.255.200

255.254.0.0

Configuration

Reference Manual

September 2020

00809-0200-4420

8

Emerson.com/Rosemount

Содержание Smart Wireless Gateway 1420

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды