Emerson RXi2-UP Скачать руководство пользователя

Страница: 35 / 66

RXi2-UP IPC Hardware Reference Manual

Section 5

GFK-3047D

Oct 2021

Installation and Startup

5.8

RTC Battery Replacement

WARNING

There is a danger of explosion if the battery is incorrectly replaced. Replace only with the

same or equivalent type to Rayovac BR2032. Dispose of used batteries according to
Emerson-provided instructions and applicable local regulations.

CAUTION

Static-sensitive Devices: Handle only at static-safe workstations.

ATTENTION

The information described in this section applies to service technicians only.

5.8.1

To replace the Real-Time Clock (RTC) battery

Remove power from the RXi2-UP IPC.

Loosen the four captive screws on the RXi2-

UP IPC’s top cover and remove it.

Figure 35: RTC Battery (Removed Top Cover)

Remove the RTC battery from the retaining clip.

Install a new RTC battery in the retaining clip with the positive (+) side up.

WARNING

Do not use a different battery type other than the type as removed or equivalent type to

Rayovac BR2032 as this may present a risk of fire or explosion!

WARNING

The battery may explode if mistreated. Do not recharge, disassemble, heat above 100°

C (212 °F), or incinerate!

Reattach the top cover on the IPC and tighten the four screws to secure it.

Содержание RXi2-UP



































































Результаты поиска

Содержание RXi2-UP

Отзывы:

Похожие инструкции для RXi2-UP

Бренды по названию

Популярные бренды

Emerson RXi2-UP, Справочник по аппаратуре

Результаты поиска

Содержание RXi2-UP

Отзывы:

Похожие инструкции для RXi2-UP

Бренды по названию

Популярные бренды