Safety messages
CAUTION
This guide provides basic guidelines for Rosemount
™
752 Remote Indicator. It does not provide
instructions for configuration, diagnostics, maintenance, service, troubleshooting, Explosion-proof,
Flameproof, or intrinsically safe (I.S.) installations. Refer to the Rosemount 752
for
more instruction. Thismanual is also available electronically on
WARNING
Explosions could result in death or serious injury.
Installation of this indicator in an explosive environment must be in accordance with the appropriate
local, national, and international standards, codes, and practices. Review the Product Certifications
section for any restrictions associated with a safe installation.
•
Before connecting a communicator in an explosive atmosphere, make sure the instruments in the
segment are installed in accordance with intrinsically safe or non-incendive field wiring practices.
•
In an explosion-proof/flameproof installation, do not remove the indicator cover when power is
applied to the unit.
Electrical shock can result in death or serious injury.
•
Avoid contact with the leads and terminals. High voltage that may be present on leads can cause
electrical shock.
Conduit/cables entries
•
Unless marked, the conduit/cable entries in the transmitter housing use a
½
–14 NPT thread form.
Entries marked “M20” are M20
×
1.5 thread form. On devices with multiple conduit entries, all
entries will have the same thread form. Only use plugs, adapters, glands, or conduit with a
compatible thread form when closing these entries.
•
When installing in a hazardous location, use only appropriately listed or Ex certified plugs, glands,
or adapters in cable/conduit entries.
Contents
Wiring connection......................................... 3
Configure the transducer block......................7
Product Certification......................................9
Declaration of Conformity............................16
China RoHS.................................................. 19
Quick Start Guide
February 2019
2
Rosemount 752
